Product use of film slitting machine
2022-03-03
The working principle of film slitting machine
- Classification:Industry information
- 作者：
- 来源：
- Release time:2022-03-03
- 访问量：0
【概要描述】The film slitting machine consists of an unwinding mechanism, a cutting mechanism, a rewinding mechanism, various functional rollers, and a tension control rectification control and detection device.
The working principle of film slitting machine
【概要描述】The film slitting machine consists of an unwinding mechanism, a cutting mechanism, a rewinding mechanism, various functional rollers, and a tension control rectification control and detection device.
- Classification:Industry information
- 作者：
- 来源：
- Release time:2022-03-03
- 访问量：0
详情
The film slitting machine consists of an unwinding mechanism, a cutting mechanism, a rewinding mechanism, various functional rollers, and a tension control rectification control and detection device. The working principle is as follows: the metallized film raw material released from the unwinding mechanism enters the cutting mechanism through the flattening roller, the tension detection roller, the energizing roller and the deviation correction system. After the raw material is slit, it is wound by the winding mechanism. Standard rolls.
PLC completes the operation, controls the actions of each part, and realizes the self-diagnosis function of the system;
As a human-machine interface, the touch screen accepts operator instructions to set and display various operating parameters;
The frequency converter drives the main drag motor to provide motion and power for each transmission mechanism;
The unwinding tension control system adopts constant tension unwinding to ensure that the raw materials are not deformed or wrinkled during the slitting process;
The winding tension control system adopts constant torque winding, so that the finished material roll after winding is properly tight and the end face of the film roll is neat;
The deviation correction control system corrects the deviation caused by various factors in the raw material or transmission process, so that the knife edge is always kept in the center of the metallized film isolation belt during the slitting process, so as to ensure the realization of edge retention accuracy;
The signal detected by the sensor is sent to the PLC to record the length, diameter and various motion states of the film roll after slitting to realize the automatic control of the system.
扫二维码用手机看
MESSAGES
Please leave your valuable opinions or suggestions and contact information (email or phone), so that we can reply to you in a timely manner!
Customer message
Description:
Shantou Zhongtu Machinery Co., Ltd
Folding machine, fully automatic slitting machine, film coating machine, film slitting machine, plastic blowing machine, fully automatic laminating machine
