Industry information_News Center_Hot Shrink Film Blowing Machine、CYDQ-L Gantry Type Film Sitter Machine、Shantou Chengye Machinery Co Ltd

03-03 

Product use of film slitting machine

The winding adopts the upper and lower double air expansion shafts in the same direction and the center winding method. The clamping of winding and unwinding and the movements of the knife shaft and t

03-03 

The working principle of film slitting machine

The film slitting machine consists of an unwinding mechanism, a cutting mechanism, a rewinding mechanism, various functional rollers, and a tension control rectification control and detection device.

03-03 

Industry differentiation intensifies, machinery industry or steady progress

In the first half of this year, the economic operation of the machinery industry showed a trend of stabilization, and the overall performance indicators were better than those of the industry and the

03-03 

The bottom is basically visible, the machinery industry has stabilized and needs to be consolidated

In the first half of the year, "downward and stable, with a slight recovery", the trend of the whole year "steady with progress, under pressure to move forward". At the recent analysis meeting on the

03-03 

The bottom is basically visible, the machinery industry has stabilized and needs to be consolidated

In the first half of the year, "downward and stable, with a slight recovery", the trend of the whole year "steady with progress, under pressure to move forward". At the recent analysis meeting on the

03-03 

Film blowing machine operating procedures

In order to standardize the operation and ensure the equipment, personal safety and product quality, the equipment must be operated as required. To prepare for the boot, 2 people are required to be

04-02 

Film blowing machine contribution to the food packaging industry

To meet the packaging of various products on the market, the new film blowing machines produced by the film blowing machine machinery manufacturing industry include sheet film blowing machines, pe foam film blowing machines, multilayer composite film blowing machines, color strip film blowing machines, and heat shrink Film blowing machine and so on. The high-end blown film quality has won the favor of high-end commodity packaging. The film blowing machine is one of the most important mechanical equipment in the industry, when flexible packaging has gradually become the protagonist of food packaging materials. The quality of film blowing machine and film blowing technology determine the quality of film forming. Therefore, a film blowing machine with good performance shows good market adaptability in the process of producing films, improves production efficiency, and provides convenience for people and promotes the harmonious development of society. Food packaging is the field where the film is most used. The high-end film blown by the film blowing machine can be used as a product packaging promotion to increase commercial value.

04-02 

How to control the temperature of the film blowing machine to facilitate film lifting and normal film blowing

The film made by the film blowing machine can be widely used in light and heavy packaging due to its good barrier property, preservation, moisture resistance, frost resistance, oxygen barrier and oil resistance. Such as various fresh fruits, meat products, pickles, fresh milk, liquid beverages, medical supplies and other fields are widely used. In order to facilitate the film blowing machine and normal film blowing, the temperature of the film blowing machine needs an optimal temperature, then how will this temperature be controlled. According to the melting theory of plastics, the extruder screw of blown film is divided into three sections: feeding section, melting section and homogenization section. At the end of the feeding section and at the beginning of the melting section, according to the melting theory, its temperature should be the viscosity flow temperature. The viscosity flow temperatures of various blown resins are PP: 164-175 degrees Celsius, PE: 105-135 degrees Celsius, PA: 195-210 degrees Celsius. Environment determines product quality.

04-02 

The relationship between film blowing machine product quality and environmental protection

In the new economic development, commercialization is an important feature in the production process. In the film blowing machine manufacturing industry, new film blowing machines produced with high and new technology not only adapt to the diversified needs of the market, but the state-of-the-art technology to promote energy-saving production processes not only brings economic benefits, but also increases Social welfare. Packaging is an indispensable part of the current popular packaging market, mainly plastics, paper, and film blow molding machines. The blow molding industry is mainly a large proportion of the market share, but with the increasingly strict requirements of the paper industry, the new environmental protection and energy saving indicators have improved The threshold in the paper industry leads to a cost in the market price of expanded paper packaging. This has led to a corresponding increase in the market share of plastic packaging to promote the development of the film blowing machine manufacturing machinery industry, environmental protection and energy-saving technology, and the attention of the film blowing machine machinery industry to promote the high-end level of film blowing machines. In order to meet the needs of social products and environmental protection, the film blowing machine will continue to introduce advanced technology, adjust the industrialized business model, and promote the plastics industry to move towards the high end. New film blowing machine film blowing machine machinery manufacturing industry sheet film blowing machine, bottle blowing machine PE foam film, multi-layer composite film blowing machine, color film blowing machine, heat shrinkable film blowing machine, etc., to meet the market The packaging of various products, the quality of high-end blown film has won the favor of high-end commodity packaging.

04-02 

Film blowing machine technical guide

1. The film is too sticky and has poor opening Causes of failure: ① The resin material type is wrong, and it is not a low-density polyethylene resin particle of blown film grade, which contains no opening agent or the content of the opening agent is low; ② The temperature of the molten resin is too high, the fluidity is too high; ③ Blow If the ratio is too large, the opening of the film becomes worse; ④ The cooling rate is too slow, the film is insufficiently cooled, and mutual adhesion occurs under the action of the traction roller pressure; ⑤ The traction speed is too fast. Solutions: ①Replace the resin raw material, or add a certain amount of opening agent to the bucket; ②Appropriately reduce the extrusion temperature and resin temperature; ③Appropriately reduce the blow-up ratio; ④Increase the air volume, improve the cooling effect, and accelerate the film cooling Speed; ⑤ Properly reduce the traction speed. 2. Poor film transparency Causes of failure: ① The extrusion temperature is low and the plasticization of the resin is poor, resulting in poor transparency of the film after blow molding; ② The blow-up ratio is too small; ③ The cooling effect is poor, which affects the transparency of the film; ④ In the resin raw material The moisture content is too large; ⑤The traction speed is too fast, and the film cooling is insufficient. Solutions: ① Properly increase the extrusion temperature so that the resin can be evenly plasticized; ② Properly increase the blow-up ratio; ③ Increase the air volume to improve the cooling effect; Dry the raw materials; ⑤ Properly reduce the traction speed. 3. The film is wrinkled Causes of the failure: ① The thickness of the film is uneven; ② The cooling effect is not enough; ③ The blow-up ratio is too large, which causes the bubble to be unstable, swinging back and forth, and easy to wrinkle; The film is flattened within the distance, so the film is also prone to wrinkle; ⑤ The pressure on the two sides of the traction roller is inconsistent, one side is high and the other side is low; fold. Solutions: ①Adjust the thickness of the film to ensure that the thickness is uniform; ②Improve the cooling effect and ensure that the film can be fully cooled; ③Appropriately reduce the inflation ratio; ④Appropriately reduce the angle of the herringbone splint; Ensure that the film is evenly stressed; ⑥ Check the axis of each guide shaft and make them parallel to each other 4. The film has foggy water marks Causes of failure: ① The extrusion temperature is low and the resin plasticization is poor; ② The resin is damp and the moisture content is too high. Solution: ① Adjust the temperature setting of the extruder and increase the extrusion temperature appropriately. ② To dry the resin raw materials, it is generally required that the water content of the resin cannot exceed 0.3%. 5. Uneven film thickness Causes of failure: ① The uniformity of die gap directly affects the uniformity of the film thickness. If the die gap is not uniform, some parts have larger gaps and some parts have smaller gaps, resulting in more or less extrusion volume , The thickness of the formed film is also inconsistent, some parts are thin, and some parts are thick; ②The temperature distribution of the die mouth is uneven, and there are high and low, so that the film thickness after blowing is uneven; ③ Around the cooling air ring Inconsistent air supply, resulting in uneven cooling effect, resulting in uneven film thickness; ④ Inappropriate inflation ratio and traction ratio, making the thickness of the bubble difficult to control; ⑤ The traction speed is not constant and changes continuously, This of course will affect the thickness of the film. Solutions: ①Adjust the die gap of the machine head to ensure uniformity everywhere; ②Adjust the temperature of the die mouth to make the temperature of the die part uniform; ③Adjust the cooling device to ensure that the air output of the air outlet is uniform; ④Adjust the inflation Ratio and traction ratio; ⑤ Check the mechanical transmission device to keep the traction speed constant. 6. The thickness of the film is too thick Causes of failure: ① The die gap and extrusion volume are too large, so the film thickness is thick; ② The air volume of the cooling air ring is too large, and the film is cooled too quickly; ③ The traction speed is too slow. Solutions: ①Adjust the die gap; ②Appropriately reduce the air volume of the wind ring to make the film further inflate, thus making its thickness thinner; ③Appropriately increase the traction speed 7. The thickness of the film is thin Causes of failure: ①The gap between the die openings is too small and the resistance is too large, so the thickness of the film is thin; ②The air volume of the cooling air ring is too small, the film is cooled too slowly; . Solutions: ①Adjust the die gap; ②Appropriately increase the air volume of the wind ring to speed up the cooling of the film; ③Appropriately reduce the traction